| Subject | Text |
| Bush ws6671sil - 11AK19Pro chassis - Help needed! | Hello!
First off, this site is probably the most useful electronic repair site I have come across. |
| VIZO | I have a Vizio Model VO42E, 42" LCD. Have a problem like a lot of people mention having: Plug T |
|
|
| I just found out that the V-INVERTER is stable 14v when not connected to signal (VGA)
BUT when conn |
| Replaced D31 with a new one it was dead.
Removed U31
CN2 Unplugged
Standby. |
| Need to build a simple circuit | Hello, I am doing a project in which I have to change 120V AC to 12V DC to power some 12V lights and |
| Nashville,TN....
also I did get some measurements with a digital multimeter...
I will list the |
| Samsung SyncMaster 710MP - TV mode not working | Hello everyone! This is my first post so forgive me if I miss something to explain.
This TV sudde |
| Faulty Black Diamond Tv | Not sure but it may be AK19PRO chassis. I copied and pasted fault info on AK19 series below to see i |
| mitsubishi vs-45609 | Minnie
I checked all the connectors and they where fine,So I ended up taking the main board out of |
| Hey Minnie,
Glad you're still on this thread.
Are you talking about the Vs and Va on the power |
| Ok, so what I found:
Ribbon cables are good.
LA6510 is the driver for both the head motor and |
| Pioneer 50" Plasma PDP-502MX | When I turn it on it makes two clicking sounds "relay" then the error
light on the Powers |
| Hi,
1. Is input voltage for LD1086V correct? Linear regulators will get very hot if input / output |
| Philips L01H.2E | Hi.
I am having trouble with som hotel CRT's 17HT5404, they are turning off after 2-5 min, and i ca |
| Need_circuit for12v DC to 350v DC converting | hi.
i need the circuit that convert 5V(or12V or 14V) DC voltages to 350 DC voltage with minimum ou |
| Grundig TV and DVD problems | Hi all!
I have two problems with Grundig products. A TV and a DVD.
1)Grundig CUC 7303 (20” CRT |
| Right, lifted the anode of D812 of the +14V line that also goes to a 7808 regulator for the +8V supp |
|
|
| Start by checking the fuses in power supply area: PS601, PS602, PS651 (22V), PS652 (14V), PS653 (7V) |
| Daewoo CM915 No Picture Problem | Hi
I have a PARS TV with a chasis of CM915, I think It is Daewoo
Here the Schematic
http://ww |
| SAMSUNG TV29 PICTURE OK BUT ABNORMAL SOUND | TV samsung 29 inch picture is ok,but sound abnormal...trace audio line 14v to res 33k open,after rep |
| Sorry.....the numbers above are the pin number, the function description....and then actual
ho |
| Stabilock 4010A | My Stabilock 4010 PSU's gone faulty, but looking at board it uses obsolete
IC's, board has voltages |